Page 55Set the Data FormatTips for success• When you choose a data format, the printer might not operate properly if data in another format is sent.• If you have the SmartDriver installed and connected to the printer, suspend communication using the PrinterToolbox before changing values. If you change the data format, unexpected cards might be printed.1 With “Configuration” displayed on line 1, press the Up or Down Arrow key if neededto display “Data Format” on line 2.2 Press the Enter key. The current data format value is displayed on line 2.3 Press the Up or Down Arrow key to display the data format you want. Possiblevalues are SmartDriver, Open Card (requires the Open Card option), andReserved. The Reserved value is not supported.4 Press the Enter key. “Apply/Restart” appears on line 2.5 Press the Enter key to apply the value(s) and restart the printer.6 If you did not choose a different data format, the display shows “DHCP/Static IP” online 2. Press the Up or Down Arrow key to scroll to “Exit” on line 2 to leave withoutmaking changes.When the printer restarts, the Ready light shows amber (yellow) and then blinks green.Internal printer components move and the LCD panel changes to show “Printer Ready” on the first line.
