Dahua VTO Series Quick Start Manual

Also see for VTO Series: User manual

Dahua VTO Series Quick Start Manual Manual pdf 39 page image

错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 29Swipe the card that needs to be authorized, and then the "Issued card successfully”notice is displayed.6.3.3 Modifying IP AddressIn the project mode, select IP Config.Press numeric keys of 2, 8, 4, and 6 to select the item you need to modify, and thenpress # to start input. After inputting, press # to confirm.After the modification is finished, press / to exit.6.3.4 Modifying VolumeIn the project mode, select Volume Config.Press numeric keys of 4 or 6 to decrease or increase the key press volume and the ringvolume.After the modification is finished, press / to exit.6.3.5 Viewing WEB PortIn the project mode, select Web Port to view the web port, and press / to exit.6.3.6 Modifying Project PasswordIn the project mode, select “Change Password.”Enter the new project password, and then press # to confirm.The “Modified succeeded” notice is displayed.6.3.7 Adding Room No.You can only add room number on the VTO that works as SIP server, and then you can configurethe added room number on the corresponding VTH to connect it in the network.In the project mode, select “Add Number.”Enter the room number you need to add, and then press # to confirm.The “Add Success” notice is displayed.After adding room number is finished, press / to exit, and you can view theadded room number in the contact.

/ 39

Related manuals for Dahua VTO Series