Dahua Digital VTH Series User Manual

Also see for Digital VTH Series: Quick start guide Quick start guide Quick start guide Quick start guide

Dahua Digital VTH Series User Manual Manual pdf 69 page image

Interface Operation 60Press [Forget Password].The system displays “QR Code” interface, as shown in Figure 6-19.Figure 6-19Scan the QR code with any code-scanning APP, bind your email box, send it by emailto support_cpwd@htmicrochip.com, and thus obtain security code.Press [Next].Enter “Password”, “Confirm Password” and obtained “Security Code”.Press [OK] to complete resetting the password.6.3.1.2 Reset the Password in VDPconfigUse VDPconfig tool to export XML file (ExportFile.xml), send it by email tosupport_cpwd@htmicrochip.com, and obtain XML file (result.xml). Then, import the file andreset a new password.Please refer to “VDPconfig Help Document” for details.6.3.2 Network SettingsSet VTH network info according to actual conditions, since different types of devices supportdifferent access modes.IP addresses of VTH and VTO shall be in the same network segment. Otherwise, VTH will failto obtain VTO info after configuration.Press [Setting] for over 6 seconds.The system pops up “Password” prompt box.Enter the password set during initialization, and press [OK].Press [Network].The system displays “Network” interface, as shown in Figure 6-20 or Figure 6-21.