9CONTROLSSETTING THE CLOCKWhen the oven is first plugged in, the display will flash “:0” and a tone will sound. If the AC powerever goes off, the display shows “ : 0” when the power comes back on.1. Touch CLOCK pad.This is a 12 hour clock system.2. Touch CLOCK pad once more.This is a 24 hour clock system.3. Enter the correct time of day by touching the time set padsin sequence.4. Touch CLOCK pad.NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone willsound. Touch the CLOCK pad and re-enter the time.The display stops blinking, and the colon startsblinking. If you selected 12 hour clock system,this digital clock allows you to set from 1:00 to12:59. If you selected 24 hour clock system, thisdigital clock allows you to set from 0:00 to 23:59.TIME DEFROSTINGWhen DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating defrost andstand times by cycling on and off.When you touch START pad, the DEF indicator starts blinking to show the oven is in the DEFROST mode. Thedisplay counts down the time to show you how much defrosting time is left in the DEFROST mode.The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. When thedefrosting time ends, you will hear 3 beeps.NOTE : This oven has multiple clock systems.If you want 12 hour clock system,omit this step.1. Touch DEFROST pad.2. Touch the time set pads for thedesired defrosting time.3. Touch START pad.The DEF indicator lights and “ : 0” is displayed.The display will show what you touched.Note : Your oven can be programmed for 99minutes 99 seconds. ( 99 : 99 )