Dacor Preference RGC304 Installation Instructions Manual

Also see for Preference Renaissance RGC304: Planning guide Combination installations Use and care manual Use and care manual Planning guide

Contents

Dacor Preference RGC304 Installation Instructions Manual Manual pdf 10 page image

8Installation InstructionsSingle BurnerAssemblyDual BurnerAssemblyIgniterGrateCap coverCap coverBurner capSkirtBurner head*Burner headBurner baseWide side down!Line up notchwith igniterInstalling the Burner ComponentsWARNINGNever attempt to operate the cooktop with any of the•burner parts removed.Do not attempt to adjust the burner air mixture set-•tings. All adjustments are preset at the factory.Remove the burner heads, burner rings, burner caps1.and grates from their shipping packages.Install the burners as shown. When installing the burn-2.er components, twist each piece back and forth until itdrops completely into place. The burners will not oper-ate properly unless all of the burner pieces are properlyseated.Gently set the grates on top of the spill tray. Make sure3.that the rubber feet are positioned in the dimples.* The burner head on the dual burner assemblyis permanently attached to the burner base. Itcannot be removed by the customer.