E16problEM poSSIblE CaUSE SolUTIon1. Part or all of MicrowaveIn-A-Drawer™ does notoperate.• Power cord of Microwave In-A-Drawer™ is not completely connectedto the electrical outlet.• Power outage.• Fuse/circuit breaker at home doesn’twork.• Microwave In-A-Drawer™ is in DemoMode.• Make sure the power cord is tightly con-nected to the outlet.• Check house lights to be sure. Call yourlocal electric company for service.• Replace the fuse or reset the circuitbreaker.• See page 14 for how to cancel DemoMode.2. Food in microwave is notheated.• No power to the appliance.• Drawer controls improperly set.• Drawer is in Demo Mode.• See SOLUTION for PROBLEM 1.• Check if the controls have been properlyset.• See page 14.3. Microwave In-A-Drawer™light does not work.• Light bulb is loose or burned out. • Call for service.4. Touch controls will notoperate.• Control Lock is on. • See page 14 to unlock.5. Display flashes. • Power failure. • Press the STOP/CLEAR key and resetthe clock. If the Microwave In-A-Drawer™was in use, you must reset the cookingfunction.6. Steam from the vent. • Normal operation. During microwav-ing, steam may come from theright side of the vent.Please check the following before calling for service. It may save you time and expense.before you Call For Service