PLANNINGGUIDEWeb: http://www.Dacor.comCorporate Phone: 800-793-0093Specifications are subject to change without notice.See installation instructions for additional details. 2.824”, 27”, 30”, 36” Wide,Warming DrawersEWD, IWD, MWDV, MWDH, MRWD, PWDWarming Drawers1/2Revised06/03/08Warming DrawerCooktop 1 1/2" (38 mm)Typical counter top3/4” Min.*(19 mm)120 VacelectricalreceptacleA36" Typ.(914 mm)BCAWarming DrawerWarming DrawerB3/4" Min.*(19 mm)D3/4" Min.*(19 mm)120 Vacelectricalreceptacle36" Typ.(914 mm)CC27"/30"/36"Dacorsingle ovenWarming DrawerWarming DrawerToe KickDCDC120 VacElect.120 VacElect.A 3/4" Min.*(19 mm)Model “A” Cutout Width “B” Min. Width to AdjacentDoors/Drawers “C” Cutout Height “D” Min. Vertical GapBetween CutoutsIWD24 22 1/2” (572mm) 24 1/4”*(616mm)9 1/8” (232mm) 1 1/16”*(27mm)EWD24EWD2725 1/2” (648mm) 27 1/4”*(692mm)IWD27MWDH27MWDV27MRWD27PWD27EWD3028 1/2” (724mm) 30 1/4”*(768mm)IWD30MWDH30MWDV30MRWD30PWD30EWD36 34 1/4” (870mm) 36 1/4”(921mm)CUtoUts DIMENsIoNsCUtoUt DEPtH: 24” MIN. (610mm)* EWD36 cannot be stacked. Bare minimum spacing shown allows extra space to avoid scrapping and allow forventilation. On IWD series models, additional space may be required if an oversized drawer front is used. Use thedrawer face dimensions for the corresponding EWD series model for reference.