Dacor Epicure ER30DSCH Installation Instructions Manual

Also see for ER30DSRSCH: Use and care manual Installation instructions

Contents

Dacor Epicure ER30DSCH Installation Instructions Manual Manual pdf 11 page image

Installation InstructionsChanging the Backguard (Models ER30D andER30D-C)Models ER30D and ER30D-C come standard with a 3” backguardinstalled. The 6” and 9” backguards are optional.To change the backguard:Remove and retain the three (3) chrome screws on the frontof the existing backguard.Remove and retain the two (2) upper screws on the back ofthe side panels.Slide the existing backguard off the unit.Place the new backguard over the back of the range.Fasten the backguard using the five (5) existing screws.1.2.3.4.5.Backguard InstallationNew BackguardHeight VariesInstalling the ATK30SR Raised Vent Trim KitTo install the optional raised vent with self-rimming modelER30DSR, you must install the optional raised vent trim kit.To change the trim on model ER30DSR:Remove and retain the seven (7) chrome screws that holdthe existing trim pieces in place.Slide the existing trim pieces off the range.Slide the new trim pieces onto the range.Fasten the new trim pieces in place using the existing screws.Installing the ARSP3 3-Inch Side Panel Kit(Model ER30DSR Only)For self-rimming installations with non-standard countertopdepths, installation of the optional side panel kit may be necessaryto cover the sides of the range that protrude from the cabinet.To install the side panel kit:Open the oven door. Remove and retain the two (2) screwson the top of the kick panel. The screws are accessedthrough the space between the door and the oven opening.1.2.3.4.1.Trim Removal and InstallationRemove andretain screwsSpace betweendoor and ovenopening