Dacor DYCT304G Installation Instructions Manual

Also see for DYCT304G: Installation instructions Installation instructions Use and care manual Use and care manual

Contents

Dacor DYCT304G Installation Instructions Manual Manual pdf 11 page image

9Installation InstructionsAssembling the BurnersWARNING• Never attempt to operate the cooktop with any of the burner parts removed.• Do not attempt to adjust the burner air mixture settings. All adjustments are preset at the factory.1. Remove the burner heads, burner rings, burner caps, and grates from their shipping packages.2. Assemble the burners as shown below. When assembling the burner components, twist each piece back and forthuntil it drops completely into place.• The burners will not function properly unless all of the burner pieces are correctly seated.3. Gently set the grates on top of the spill tray. Make sure that the rubber feet are placed in the indentations located inthe spill tray.* The SimmerSear burner head is permanently attached tothe burner base. It cannot be removed by the user.Burner and Grate Diagram forDYCT304G and DYCT365GSingle BurnerAssembly SimmerSear™Burner AssemblyIgniterGrateBurner capBurner skirtBurner head *Burner headBurnerbaseWide side downLine up thisnotch withthe igniterFeet(bottom view)Cap coverCap cover