Instructions:Introduction:The DR30EI[F]S, RNR30NI[F]S and RR30NI[F]S ranges require a rear trim piece for installationswith a downdraft vent. The trim piece attaches to the back of the range and covers the front of thedowndraft vent chassis when the range is slid into position.Downdraft Vent Trim Kit,P/N ATKR30SRINSTALLATIONINSTRUCTIONSRANGE MODELS: DR30EIS, DR30EIFS, RNR30NIS,RNR30NIFS, RR30NIS, RR30NIFSPart No. 107333 Rev. BParts included with this kit:3 Hex Screws PN 83023Rear Trim Piece PN 107324Trim Installation(Range style varies with model) Trim InstalledInstall the rear trim piece as shown using the three hex screws included with the kit. The screwsthread into the pre-drilled holes on the back of the range.

Dacor ATKR30SR Installation Instructions Manual

Product

Learn More

Legal