IMPORTANT1. Before beginning installation, please thoroughly read and become familiar with these instructions.2. Installation and service must be completed by a qualified installer or service agency.3. Installer: Please leave these Installation Instructions with the owner.4. Owner: Please keep these instructions for local electrical inspectorʼs use and for future reference.5. Read the accompanying Use & Care Manual prior to operating this appliance.TABLE OF STEPSSTEP 1 Verifying package contents Page 2STEP 2 Gas supply requirements Page 2STEP 3 Electrical power supply requirements Page 2STEP 4 Gas and electrical rough-in locations Page 2-3STEP 5 Cabinet and countertop preparation Page 3-4STEP 6 Overall dimensions Page 5STEP 7 Installing the anti-tip bracket Page 5STEP 8 Gas regulator and electrical conduit location Page 6STEP 9 Removal and installation of backguards Page 6STEP 10 Removing the oven door Page 7STEP 11 Electrical connection Page 7-8STEP 12 Gas connection Page 8STEP 13 Installing the range Page 8STEP 14 Installing the burner components Page 9STEP 15 Re-installing the oven door Page 9STEP 16 Verifying proper operation Page 9Part No. 65089-D Rev. 123003TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FORHOUSEHOLD GAS COOKING APPLIANCES.NOTES:Contain helpful hints and tips to facilitate the installation.CONVENTIONS USED IN THESE INSTRUCTIONSIMPORTANT:Must be followed carefully to avoid damage.WARNINGS:Must be followed carefully to avoid personal injury.SAVE AND READ THESE INSTRUCTIONSInstallation InstructionsEpicure™ Ranges