Menu
DCSENG S LT Series Manual
                             | |
S-Cutter 132. Mounting of the cutting and beveling blade① To push the cutting head aside, loosen the cutting head fixing nut (A), move it in thearrow direction, hold the head with hand, and turn it in the folding bracket direction(B).② Turn it until the head moves to about 90°, when a clicking sound is heard, so as tomake sure that the cutting handle gear box remains firmly fixed.③ Check the arrow sign on the cutting blade and then put into the cutting shaft;Then, mount the fixing pin of the washer with the hole of the cutting shaftand tighten with the nut(firmly with a 22mm spanner).④ Hold the cutting head and return it to its original position;Then, tighten the cutting head fixing nut (A) using the 22mm spanner(for S-100LT,T-wrench(6mm) is used).Right-side nutWasherLeft-side nutCutting bladeWasher |
Related manuals for DCSENG S LT Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved