DAPAudio DLM-12A User Manual

Contents

DAPAudio DLM-12A User Manual Manual pdf 11 page image

10DLM-12A / DLM-12SAOrdercode: D3223 / D3224Two Active Subwoofers & Two Active Satellite Speakers1) Make your initial connections with all the equipment powered off and ensure that all the mainvolume controls are turned completely.2) Connect one side of the signal cable at your audio mixer into OUTPUT LEFT/RIGHT and the other sideof the cable into the Left/Mono input of your active DLM subwoofers.3) Connect one side of another signal cable at your active subwoofers into the HIGHPASS Output andthe other side of the cable into the LINE INPUT (COMBO) of your active satellite speakers.4) Connect the power cords to main.5) Turn on your mixer first, then the active speaker cabinets.6) Turn up the volume controls of the active speaker cabinets.7) Use PFL function to get the proper input level for the mixer and adjust the Main Mix Level.8) After using your equipment, turn off your active speaker cabinets first, then the mixer.