D-Link DWS-4000 Series Cli Command Reference

Also see for DWL-8600AP: User manual Administrator's guide User manual Administrator's guide Installation guide

Contents

261Access Point Profile CommandsACCESS P OINT P ROFILE COMMANDSThe commands in this section provide configuration of access point profiles. Access point profiles can be applied to multiplephysical APs.ap profileThis command adds an AP profile (if not already present) and enters the AP profile configuration mode. In this mode, youcan modify the profile configuration parameters. You can modify an AP profile at any time. If the profile is associated withone or more Managed APs, you must use the wireless ap profile apply command to send the changes to thoseAPs.no ap profileThe no version of this command deletes a configured AP profile. If the profile is referenced by an entry in the valid APdatabase, or is applied to one or more managed APs, it cannot be deleted. The default profile (1 – Default) can never bedeleted.Example: The following shows an example of the command.DWS-4026 (Config-wireless)# ap profile 1DWS-4026 (Config-ap-profile)#If the profile is in use:DWS-4026 (Config-wireless)# no ap profile 2One or more managed APs are configured with this profile, it cannot be deleted.nameThis command allows you to configure a descriptive name for the AP Profile.Default 1 - DefaultFormat ap profile <1-16>Mode Wireless ConfigParameter Description1-16 Identifier for the AP Profile.Format no ap profile <1-16>Mode Wireless ConfigDefault Default (AP profile 1)Format name Mode AP Profile Config