D-Link DWR-720/PW User Manual

Also see for DWR-720/PW: BASIC USER SETUP GUIDE User manual User manual

T2 Fixed Wireless Phone User ManualBack to Table of Contents 23How to set schedule:- [Menu][Settings][Power saving schedule on/off]Select either [PowerON] / [Power OFF] with arrow keys[OK] key- [Select] the [Time] option Choose time you want the phone to turn On orOff[OK] key to confirm- [Select] the [Repeat] option Tick the days you want the schedule to beactive by pressing the [OK] keyScroll down and press [OK] key to confirm- Once complete, press [left option key] for Options, and select Done and press[OK]- You will now see a tick next to the Power on/off to indicate that it has nowbeen setNote: Make sure the system time is correct in order for the schedule towork correctly.6.11 Call SettingsUnder the Call settings, you have the option to:- View the number of the inserted SIM card- SIM Card Call settings (Voice call settings)- General SettingsGeneral settings as follows:- Call recording: Listen to recordings of calls (requires an SD card)- Fade in ringer: When enabled, the ringtone for incoming calls will start soft,and progressively get louder- Quick responses: Set quick responses which can be used to send a messageto caller if you are unable to take a call- Delay dial: Delay dial is the time or delay that occurs from the time a numberhas been dialed until the caller or called party hears ringing. Time can be setto between 0~7 secondsVoice Call settings (Network dependent)Voicemail:You will need to setup your voicemail number before you can access this feature, contact your mobile serviceprovider for the settings. Select [Service] and choose [My carrier], then select [Setup] to enter the [Voicemailnumber] with the [OK] button. Once the correct number has been entered, press down and select [OK] or [Cancel]to exit.Fixed Dialing Numbers:1. Enable FDN: This feature is network independent; you will be required to enter the SIM PIN2 to unlock theservice. Contact your mobile operator for assistance.2. Change PIN2: You can change your current SIM PIN2. You will be required to enter your current PIN2 before youcan set a new PIN2.3. FDN list: When FDN is enabled, only numbers or prefixes listed here can be called to. Press [OK] and select [Addcontact]. Enter the name and number of the contact which can receive outgoing calls.T2 Fixed Wireless Phone User ManualBack to Table of Contents 24Call forwarding:You can set to divert incoming calls to another phone number. This is normally set to the voicemail number oranother phone number.1. Always forward: This setting redirects all incoming calls to another phone number. Press [Select] to enter aphone number and enable this function. Once complete, press down and select [Enable] to save or [Cancel] toexit. To disable this function, press [Select] and select [Disable] to save.2. Forward when busy: This setting redirects all incoming calls to another phone number if the phone line is busy.A phone line can be busy if the number is calling out, you’re not in a service area or you’re using Call waiting andalready have two callers on the line. Press [Select] to enter a phone number and enable this function. Oncecomplete, press down and select [Enable] to save or [Cancel] to exit. To disable this function, press [Select] andselect [Disable] to save.3. Forward when unanswered: This setting redirects all incoming calls to another phone number if the call isn’tanswered within a specified number of rings. Press [Select] to enter a phone number and enable this function.Once complete, press down and select [Enable] to save or [Cancel] to exit. To disable this function, press [Select]and select [Disable] to save.4. Forward when unreachable: This setting redirects all incoming calls to another phone number if the phone everloses signal for any reason. Press [Select] to enter a phone number and enable this function. Once complete,press down and select [Enable] to save or [Cancel] to exit. To disable this function, press [Select] and select[Disable] to save.Call barring:Call barring lets you stop certain types of calls being made from the phone. This feature is network independent.Please contact your network operator for setup of this feature. The default password is provided by your networkoperator.Available options are:1. All outgoing calls: This will block your phone from making all calls (except emergency & toll-free calls). You willbe prompted for the password, press down and select [OK] to save or [Cancel] to exit. Repeat the above todisable this feature2. Cancel all: Cancel all configured barring. You will be prompted for the password, press down and select [OK] tosave or [Cancel] to exit.3. Change barring password: You can change/set a pin on this feature prevent tampering. You will be promptedfor the password, press down and select [OK] to save. You will be required to enter and confirm a newpassword, press down and select [OK] to save. At any stage you can select [Cancel] to exit.Additional settings:Here you can see settings for Caller ID and Call waiting. This feature is network independent. Please contact yournetwork operator for setup of this feature.1. Caller ID: You can set the CLI of the phone to display: [Network default], [Hide number], [Show number]. Press[OK] to save or [Right soft key] to cancel.2. Call waiting: Enable/Disable to notify you of a new incoming call when you on an existing call. This feature mustbe enabled before the phone can receive any additional incoming call. If disabled, new caller will be promptedthat “the number you have dialled does not exist, please redial carefully”SDN list:You can view the list of Service Dialling Numbers (SDN) assigned by your service provider. If the service providerdoes not provide numbers this list will be empty.LND list: Gives a list of the 10 last numbers dialled from the SIM card.