D-Link DWL-G710 Troubleshooting Manual

Also see for AirPlus G DWL-G710: Features and benefits Quick installation guide User manual Quick installation guide

Troubleshooting - Can not access DWL-G710 on 192.168.0.30Please note that when accessing the device's Web interface via http://192.168.0.30 you are notaccessing some web site on the Internet. The device's configuration pages are built into thedevice. You do not have to be online to get to those pages, you just need to be connected to theDWL-G710. Please also make sure all the Anti-virus/firewall software on your computer,especially Norton, is disabled before you access http://192.168.0.30Step 1. Connect your computer's network port to your repeater's LAN ports (Ethernet ports)using a network cable.Verify physical connectivity by checking for solid link lights on the LAN ports of the device. Ifyou do not get a solid link light, try using a different cable or connect to a different port on thedevice if possible. If the computer is turned off, the link light may not be on.Step 2. Under Control Panel > Network Connections... make sure that your Local AreaConnection is enabled and not bridged with any other connection. If you see any icon therewhich is called "Bridge" - delete it. If you see your Local Area Connection marked as "Bridged" -right-click and select "Remove from Bridge".to your computersDWL-G710 troubleshooting Page 1 of 5

/ 5

Related manuals for D-Link AirPlus G DWL-G710