D-Link DWL-900AP+ User Manual

Also see for AirPlus DWL-900AP+: Brochure Brochure Quick installation guide Quick installation guide Manual 

Contents

Using the Configuration MenuWhenever you want to configure your network or the DWL-900AP+, you canaccess the Configuration Utility by opening the web-browser and typing inthe IP Address of the DWL-900AP+. The DWL-900AP+’s default IP Addressis shown below:(The IP Address shown in the example above is the default setting. Use this IP address whenconnecting to a network consisting of other D-Link devices set to their default settings. If youhave changed the IP Address of the DWL-900AP+ to conform to a network other than onewith D-Link devices, then input that IP Address in the web browser, instead of the default IPAddress shown.)Fig. 5.2Fig. 5.3• Open the web browser• Type in the IP Address ofthe Access Point• Type admin in theUser Name field• Leave thePassword blank• Click OKFig. 5.1The Configuration window willappear. You can select fromseveral options in thiswindow. Here the Home >Wireless tab is displayed. Ifyou wish to change thedefault settings, you canmake changes to thefollowing items: AP name SSID Channel WEP Encryption Key TypeHome > Wireless