This document will guide you through thebasic installation process for your newD-Link Unified Wireless Access Point.Building Networks for PeopleDWL-3600APDocumentation also availableon CD and via the D-LinkWebsiteQuick Installation Guide802.11n Unified Access PointQuick Installation Guide

quick installation guide

about this guide

mounting options

D-Link DWL-3600AP Quick Installation Manual

a ccess p oint

Section 1 - About This Document

Online Help, Supported Browsers, and Limitations

Section 2 - Getting Started

Wireless Client Requirements

Dynamic and Static IP Addressing on the AP

Figure 2 - Web UI Login Prompt

Figure 3 - Provide Basic Settings

Basic Settings

Connecting to the AP Web Interface by Using the IPv6 Address

Configuring the Ethernet Settings

Configuring IEEE 802.1X Authentication

Using the CLI to Configure 802.1X Authentication Information

Configuring Security on the Wireless Access Point

Section 3 - Viewing Access Point Status

Viewing Events

Configuring the Log Relay Host for Kernel Messages

Viewing Transmit and Receive Statistics

Viewing Associated Wireless Client Information

Figure 9 - Viewing TSPEC Client Associations

Link Integrity Monitoring

Saving and Importing the Known AP List

Viewing Managed AP DHCP Information

Viewing TSPEC AP Statistics Information

Viewing Radio Statistics Information

Viewing Email Alert Operational Status

Section 4 - Managing the Access Point

Table 17 - Ethernet Settings

Wireless Settings

Using the 802.11h Wireless Mode

Modifying Radio Settings

Configuring Radio and VAP Scheduler

Figure 19 - Scheduler Configuration

Scheduler Association Settings

Virtual Access Point Settings

Figure 22 - Modify Virtual Access Point Settings

Table 22 - Virtual Access Point Settings

None (Plain-text)

IEEE 802.1X

Figure 24 - Modify Virtual Access Point Settings (IEEE802.1X)

WPA Personal

WPA Enterprise

Table 26 - WPA Enterprise

Configuring the Wireless Distribution System (WDS)

WEP on WDS Links

WPA/PSK on WDS Links

Configuring a MAC Filter and Station List on the AP

Configuring Load Balancing

Transitioning Between Modes

Configuring 802.1X Authentication

Creating a Management Access Control List (ACL)

Figure 32 - Configure Management Access Control Parameters

Section 5 - Configuring Access Point Services

Configuring SNMP on the Access Point

Figure 34 - SNMP Configuration

Setting the SSH Status

Setting the Telnet Status

Figure 37 - Modify QoS Queue Parameters

Configuring Email Alert

Enabling the Time Settings (NTP)

Figure 39 - Time Settings (NTP)

Section 6 - Configuring SNMPv3

Configuring SNMPv3 Groups

Configuring SNMPv3 Users

Configuring SNMPv3 Targets

Section 7 - Maintaining the Access Point

Restoring the Configuration from a Previously Saved File

Performing AP Maintenance

Figure 50 - Manage Firmware (TFTP)

Packet Capture Configuration and Settings

Packet Capture Parameter Configuration

Remote Packet Capture

Figure 56 - Remote Packet Capture

Packet Capture File Download

Section 8 - Configuring Client Quality of Service (QoS)

Managing Client QoS ACLs

MAC ACLs

Creating a DiffServ Class Map

Defining DiffServ

Table 54 - DiffServ Class Map

Creating a DiffServ Policy Map

Client QoS Status

Configuring RADIUS-Assigned Client QoS Parameters

Table 57 - Client QoS RADIUS Attributes

Section 9 - Clustering Multiple APs

Figure 64 - Manage Access Points In The Cluster (Active)

Removing an Access Point from the Cluster

Sorting Session Information

Configuring and Viewing Channel Management Settings

Viewing Current Channel Assignments and Setting Locks

Viewing Wireless Neighborhood Information

Figure 67 - View Neighboring Access Points

Viewing Details for a Cluster Member

DWL-3600AP

user manual

About This Document

document conventions

Section 1: Getting Started

Booting the Switch

Boot Menu Functions

Start Operational Code

Retrieve Event Log Using XMODEM

Load Configuration Using XMODEM

Run Flash Diagnostics

Update Boot Code

Reset the System

Understanding the User Interfaces

Device View

Navigation Tree View

Configuration and Monitoring Options

Help Page Access

Using SNMP

Section 2: System Administration

System Description

Defining System Information

Viewing Inventory Information

Table 5: Card Configuration Fields

Slot Summary

PoE Configuration

PoE Status

Serial Port

IP Address

Network DHCP Client Options

Figure 16: DHCP Client Options

HTTP Configuration

User Accounts

Table 13: User Accounts Fields

Adding a User Account

Authentication List Configuration

Creating an Authentication List

Authentication List Summary

Login Session

User Login

Assigning a User to an Authentication List

Table 18: Denial of Service Configuration Fields

Multiple Port Mirroring

Adding a Port Mirroring Session

Removing or Modifying a Port Mirroring Session

Table 21: Telnet Session Configuration Fields

Outbound Telnet Client Configuration

Ping Test

TraceRoute

Configuring SNTP Settings

SNTP Settings

SNTP Server Configuration

SNTP Server Status

SNTP Global Status

Figure 33: Global Status

Time Zone Configuration

Summer Time Configuration

Summer Time Recurring Configuration

Clock Detail

Configuring and Viewing Device Port Information

Section 1: About This Document

Document Conventions

Online Help, Supported Browsers, and Limitations

Section 2: Getting Started

Administrator's Computer Requirements

Wireless Client Requirements

Recovering an IP Address

Installing the UAP

Basic Settings

Connecting to the AP Web Interface by Using the IPv6 Address

Configuring the Ethernet Settings

Using the CLI to Configure Ethernet Settings

Configuring IEEE 802.1X Authentication

Verifying the Installation

Configuring Security on the Wireless Access Point

Section 3: Viewing Access Point Status

Viewing Interface Status

Viewing Events

Figure 4:  Persistent Logging Options

Configuring the Log Relay Host for Kernel Messages

Viewing Transmit and Receive Statistics

Table 9:  Transmit/Receive

Viewing Associated Wireless Client Information

Viewing TSPEC Client Associations

Link Integrity Monitoring

Table 12:  Rogue AP Detection

Saving and Importing the Known AP List

Viewing Managed AP DHCP Information

Table 13:  TSPEC Status and Statistics

Viewing TSPEC AP Statistics Information

Viewing Radio Statistics Information

Viewing Email Alert Operational Status

Section 4: Managing the Access Point

Figure 13:  Ethernet Settings

Wireless Settings

Table 18:  Wireless Settings

Using the 802.11h Wireless Mode

Modifying Radio Settings

Figure 16:  Configuring Radio Settings (Continued)

Table 19:  Radio Settings

Configuring Radio and VAP Scheduler

Table 20:  Scheduler Configuration

D-Link DWL-3600AP Quick Installation Manual

Product

Learn More

Legal


Contents quick installation guide about this guide mounting options	This document will guide you through thebasic installation process for your newD-Link Unified Wireless Access Point.Building Networks for PeopleDWL-3600APDocumentation also availableon CD and via the D-LinkWebsiteQuick Installation Guide802.11n Unified Access PointQuick Installation Guide Next / 4