D-Link DWL-120 Quick Install Manual

Also see for Air DWL-120: Brochure Brochure Manual Specifications Specifications

1DWL-120 Driver Upgrade ProcedurePreparation for Upgrade• Make sure that the DWL-120 is rev. 1A. The 128-bit upgraderequires the rev. 1A version of the DWL-120, and will not work withprior versions of the hardware because of chipset limitations.• Download the DWL120_DRIVERS_v225.02.zip fromhttp://support.dlink.com/ to a local directory such as c:\temp.• Unzip DWL120_DRIVERS_v225.02.zip into a folder on thecomputer’s hard drive such as c:\DWL-120.• Make sure that the DWL-120 is connected to the USB port and thedrivers are already installed in the computer.NOTE: If the DWL-120 drivers have not been installed in thecomputer, please refer to the quick installation guide for the properinstallation procedure.