D-Link DVS-301 User Manual

Building Networks for PeopleDVS-301 User Manual v1.00 64Advanced functionsWebViewing system logClick the button on the configuration page to view the system log file. The content of the filereveals useful information about configuration and connection after the system boots up.Viewing system parametersClick the button on the configuration page to quickly view the whole system parameter set. Thecontent is the same as CONFIG.INI.Restore factory default settingsClick the button on the configuration page to restore the factory default settings. This meansany changes made before will be lost and the system will be reset to the initial status whenshipped from the factory. After confirmation, the system will restart and require the installerprogram to setup the network.Clear data path for proprietary commandsVideo Server provides a highly customized control support to third-party serial interface devicesaside from PTZ cameras. That means in addition to setting up a custom camera with PTZFcommands, users may utilize this mode and introduce a customized homepage to transmitarbitrary user-defined commands from the user-side to Video Server. The third-party deviceconnected to the serial port of Video Server will receive the same command sent by theoriginator. The user only needs to attach the command in ASCII format after the special URL.Video Server will parse the command and transfer into binary code to send out. See the cleardata mode serial port driver in the URL commands of Video Server section for detaileddescription.