Menu
D-Link DUB-2335 Quick Installation Manual
       |
Information in this document is subject to change without notice.© 2021 D-Link Corporation. All rights reserved.Package Contents DUB-2335 docking station Quick Installation Guide Warranty documentsMinimum RequirementsPC or laptop with: Windows 7/8/8.1/10, macOS (OS X 10.8 and above) USB Type-C port supporting DP Alt (DisplayPort Alternate Mode) for HDMI outputHardware OverviewInterfacesFigure 1Number Interface Description1 USB Type-C connector Connect to laptop or desktop computer2 USB 3.0 ports Connect to USB 3.0 devices3 HDMI port Connect to monitor*4 Gigabit Ethernet port Connect to network device5 USB Type-C/PD 3.0 port Connect to PD 3.0 chargerTable 1* Please make sure that the USB Type-C port of your computer supports DP Alt (DisplayPort Alternate Mode).LED IndicatorsLED Status DescriptionLink (per Ethernet port) Solid white Ethernet connectionSpeed (per Ethernet port) Flashing orange Data transmissionTable 2Product Setup1. Plug the USB Type-C cable, located on the side panel of the DUB-2335, into available USB Type-C port on yourcomputer. Your computer will automatically detect and install the drivers for the DUB-2335.2. You may now connect additional devices to the appropriate ports of the DUB-2335.Note: if your computer does not detect the DUB-2335, please check and ensure that the USB Type-C cable of the DUB-2335 isconnected securely, and that the USB Type-C port on your computer is functioning correctly.Connecting PD 3.0 ChargerTo charge your laptop* via connected DUB-2335, please connect PD 3.0 charger to the USB Type-C/PD 3.0 port of theDUB-2335 and plug PD 3.0 charger into a power outlet.* Please make sure that the USB Type-C port of your laptop supports PD 3.0.2 |
Related manuals for D-Link DUB-2335
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved