b u s i n e s sDSN-1100-10 iSCSI SAN Ar rayxStack Storage® 4x1GbE iSCSI SAN Array with 5 SATA BaysIntroductionD-Link’s DSN-1100-10 iSCSI SAN array is an entry-levelnetwork storage solution in a compact, desktopform factor, ideal for small businesses. The heartof the DSN-1100-10 is a powerful 10Gbit iSCSISystem-on-a-Chip (SoC) capable of handlingover 80,000 I/Os per second. The DSN-1100-10supports 10TB of raw capacity using 2TB drives.The DSN-1100-10 can be easily implemented as asupplemental backup platform for quick restores,as secondary online storage, or as bandwidthdemanding primary storage for security surveillanceand A/V applications.iSCSI for IP NetworksStorage Area Networks (SANs) have traditionallybeen reserved for complex Fibre Channel networks.The recent introduction of iSCSI has extended thepowerful centralized storage capabilities of SANtechnology to IP networks. By utilizing existingEthernet technology, the costs associated with FibreChannel switching, separate host bus adapters,expensive storage subsystems and administrationis significantly reduced. iSCSI SANs leverage theEthernet infrastructure and standards that arealready familiar to most IT personnel.Four 1GbE InterfacesThe DSN-1100-10 supports Multi-path I/O (MPIO),Multiple Connections per Session (MCS), and LinkAggregation Groups (LAG) for unmatched networkflexibility, performance and resiliency, allowing itsfour 1GbE data ports to be grouped together for upto 425MB/s bandwidth.System-on-a-Chip (SoC) ImplementationBy utilizing a SoC design, the DSN-1100-10 combinesboth networking and storage functions into a singlespecialized Application Specific Integrated Circuit (ASIC).This SoC combines 10Gbps iSCSI, TCP & IP offload,12 embedded processors and storage virtualizationfirmware onto a single chip. The tight integration ofthese functions eliminates interoperability, timingand support issues found in competitive productsthat offer a “discrete implementation” wherein variouscomponents are selected separately, then assembled.RAID supportD-Link’s xStack iSCSI SAN arrays support RAID level0, 1, 1+0 and 5 configurations (striped sets, mirroredsets, striped mirrored sets and parity sets) for dataprotection and performance.D-Link supports S.M.A.R.T., disk scan, and non-destructive data migration to prevent disk failure.Embedded Centralized Storage ManagementThe embedded, user-friendly IP-SAN DeviceManager (IDM) provides a comprehensive consolefor system management. Boasting a rich set ofmanagement features, this suite of utilities allowsmonitoring and control of the SAN array via theStorage Management Initiative-Specification (SMI-S)command set. With a secure server, users canremotely configure and monitor their SAN arraysover the Internet.Advanced Management FeaturesThe DSN-1100-10 also provides an advanced setof features for efficient management and optimalstorage performance.For the fastest RAID performance offered in theindustry, D-Link’s adaptive cache managementprovides write coalescing and multi-streamread-ahead on a volume basis, optimizing cacheFeatures• Handles Over 80,000 I/Os Per Second• Battery Protected Cache Memory:256MB Standard• System Memory: 256MB Standard• 5 Hot-Swap SATA Hard Drive Bays• Supports 10TB Capacity using 2TBHard Drives• RAID Support: 0, 1, 1+0, and 5• Supports up to 1024 volumes andhost connections• Mix and Match disk drives within asingle array• Different Capacities,Manufacturers, Technologiesand Speeds• Volume Virtualization technology• Supports multiple RAID types andvolumes segments on single drive• Optimizes capacity utilization andmaximizes performance• Supports Online Capacity Expansion,Volume Reconfiguration andMigration on the fly• Drive Roaming supported in Power Off• 200 Watt Power Supply• Compact Cube Chassis Fits AnywhereHigh Performance iSCSI Interface• Four 1GbE Data PortsStorage Network Management