D-Link DSL-2750U User Manual

Also see for DSL-2750U: User manual User manual User manual Easy guide User manual

DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN SupportUser Manual Configuring via Web-based InterfaceFigure 94. The window for adding a rule for the MAC filter.You can specify the following parameters:Parameter DescriptionSSID A wireless network to which the rule will be applied. Select theneeded value from the drop-down list.MAC address In the field, enter the MAC address to which the selected filteringmode will be applied.Hostname The name of the device for easier identification. You can specify anyname.Enable If the switch is moved to the right, the rule is active.Move the switch to the left to disable the rule.When you have configured the parameters, click the SAVE button.To edit the parameters of the existing rule, in the Filters section, left-click the needed rule. In theopened window, change the settings and click the SAVE button.To remove the rule from the page, in the Filters section, select the checkbox located to the left ofthe relevant rule and click the DELETE button ( ).After creating the rules you need to configure the filtering modes.To open the basic or additional wireless network for the devices which MAC addresses arespecified on this page and to close the wireless network for all other devices, left-click the line ofthe wireless network. In the opened window, move the Enable MAC filter switch to the right.Upon that the MAC filter restrict mode drop-down list will be displayed. Select the Allow valuefrom the drop-down list and click the SAVE button.To close the wireless network for the devices which MAC addresses are specified on this page,select the Deny value from the MAC filter restrict mode drop-down list and click the SAVEbutton.Page 120 of 173