DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Supportand USB PortUser ManualConfiguring via Web-based InterfaceLANTo configure the router's local interface, go to the Connections Setup / LAN page.IPv4Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MACaddress and IP address pairs.Figure 87. Configuring the local interface. The IPv4 tab. The Local IP Address section.Parameter DescriptionLocal IP AddressIP address The IP address of the router in the local subnet. By default, thefollowing value is specified: 192.168.1.1.Subnet mask The mask of the local subnet. By default, the following value isspecified: 255.255.255.0.Device domain name The name of the device attached to its IP address in the local subnet.Figure 88. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.Page 110 of 210
