D-Link DIR-868L User Manual

Also see for DIR-868L: User manual Quick guide User manual Features & specifications User manual

ENGLISHDIR-868LWireless AC1750Dual Band Gigabit Cloud RouterIf any of the above items are missing, please contact your reseller.DIR-868L Wireless AC1750 Dual Band Gigabit Cloud RouterPower AdapterEthernet CableWi-Fi Configuration CardQuick Install Guide1 Power LEDA solid green light indicates a proper connection to thepower supply. The light will be solid orange during boot-upand will blink green during the WPS process.2 Internet LEDA solid light indicates a connection to the Internet port. If theLED is orange, the connection is good but the router cannotconnect to the Internet. If this LED is blinking orange, thisindicates that the “on demand” connection type is set andthe Internet connection is idle.3 USB Port Connect a USB flash drive to share content throughoutyour network.4 WPS Button Press to start the WPS process. The Power LED will start toblink.5 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, andgame consoles.6 Internet Port Connect your broadband modem to this port using anEthernet cable.7 Power Button Press to power the router on and off.8 Power Port Connect the supplied power adapter.9 Reset Button Press and hold the reset button with a paper clip for sixseconds to reset the router to the factory default settings.13 456 781 Unplug the power to your DSL or Cable modem.2 Connect an Ethernet cable from the Internet port of the router to theEthernet port on your DSL or Cable modem.3 Connect another Ethernet cable from the Ethernet port on yourcomputer to one of the LAN ports on the router.4 Plug the power back into your DSL or cable modem. Please wait aboutone minute before continuing.5 Plug the power adapter into your router and connect to an availablepower outlet or surge protector. If the Power LED does not light up, pressthe Power button on the back of the router.12V 2AUSBWPS123LAN4INTERNETPOWER12V 2AUSBWPS123LAN4INTERNETPOWERModemModem DIR-868LDIR-868LComputerModem DIR-868L12V 2AUSBWPS123LAN4INTERNETPOWERComputerPackage ContentsHardware Overview Minimum Requirements Connect your Router12V 2AUSBWPS123LAN4INTERNETPOWER6 After the router has powered up, verify that the Power (green) and Internet(orange or green) LEDs are both lit then continue with the Configurationsection on the other side.ModemDIR-868LComputerEthernet PortEthernet CableInternet Port (yellow)Ethernet Cable• Users with DSL providers - If you are using a PPPoE connection, you will needyour PPPoE user name and password. If you do not have this information, contactyour Internet provider. Do not proceed until you have this information.• Users with Cable providers - Make sure you unplug the power to your modem.In some cases, you may need to turn it off for up to 5 minutes.• Advanced Users - If your ISP provided you with a modem/router combo, you willneed to set it to “bridge” mode so the DIR-868L router can work properly. Pleasecontact your ISP or refer to the user manual for your modem/router device.Before you StartNetwork Requirements:• An Ethernet-based broadband modemWeb-based Configuration Requirements:Computer with the following:• Windows® or Mac OS® X operating system• An installed Ethernet adapter or wireless adapterSupported Browsers:• Internet Explorer 7 or higher• Safari 4 or higher• Chrome• FirefoxMake sure you have the latest version of Java installed. Visit www.java.comto download the latest version.mydlink Requirements:• iPhone/iPad/iPod Touch (iOS 3.0 or higher)• Android device (1.6 or higher)• Web Browser Requirements:• Internet Explorer 7 or higher• Safari 5 or higher• Chrome• FirefoxNote: To learn more about mydlink, visit http://www.mydlink.com.29

/ 2

Related manuals for D-Link DIR-868L