DIR-825/AC Wireless AC1200 Dual Band Gigabit Router with3G/LTE Support and USB PortUser ManualInstallation and ConnectionConfiguring Wi-Fi Adapter in OS Windows XP1. Click the Start button and proceed to the Control Panel > Network and InternetConnections > Network Connections window.2. Select the icon of the wireless network connection and make sure that your Wi-Fi adapter ison.Figure 11. The Network Connections window.3. Search for available wireless networks.4. In the opened Wireless Network Connection window, select the wireless network DIR-825 (for operating in the 2.4GHz band) or DIR-825-5G (for operating in the 5GHz band)and click the Connect button.5. In the opened window, enter the network key (see WPS PIN on the barcode label on thebottom panel of the device) in the Network key and Confirm network key fields andclick the Connect button.After that the Wireless Network Connection Status window appears.! If you perform initial configuration of the router via Wi-Fi connection, note thatimmediately after changing the wireless default settings of the router you will need toreconfigure the wireless connection using the newly specified settings.Page 31 of 257
