DIR-615 Wireless N300 RouterUser Manual Configuring via Web-based InterfaceRemote Update! Attention! Do not turn off the router before the firmware update is completed. This maycause the device breakdown.To update the firmware of the router remotely, follow the next steps:1. On the Management / Firmware Update page, in the Remote Update section, clickthe CHECK FOR UPDATES button to check if a newer firmware version exists.2. Click the UPDATE FIRMWARE button (the button is displayed if a newer version of thefirmware is available).3. Wait until the router is rebooted (about one and a half or two minutes).4. Log into the web-based interface using the login (admin) and the current password.If after updating the firmware the router doesn't work correctly, please restore the factory defaultsettings. To do this, click the Factory button on the Management / Administration page. Waituntil the router is rebooted.Page 153 of 163
