D-Link DIR-412 Quick Install Manual

DIR-412Preparing the router for use(including searching for firmware updates)- The power cord to the DIR-412 router- Make sure your computer is set toobtain IP address automatically- Connect your computer to the Ethernetport with included Ethernet Cable- Open up a web browser and typehttp://192.168.0.1 in the address box- Make sure the router is on 3G ROUTER mode- Click on “Internet Connection Setup Wizard” to run the setup- Once the setup wirzard has finished, click on the STATUS tab to check therouter statusTo update the firmware:- Click on the TOOLS tab- Select FIRMWARE on the left pane- Click on the “Browse” button on the FIRMWARE UPGRADE section- Select the appropriate firmwareand click Open- Click on the Upload button toupload the firmware- Do not power off the device- Wait for firmware to be updated- Re-login to the Web GUI, thenew firmware version shouldshow on the FIRMWAREINFORMATION pageHow to set-up admin passwordFrom the “Internet ConnectionSetup Wizard”- Open up a web browser andtype http://192.168.0.1 in theaddress box- Login to the router- Click on the “Internet Connection Setup Wizard” button to run the setup- Click on the “Internet Connection Setup Wizard” button to run the setup- Complete STEP 1 to change the admin password( insert password criteria is must be 8 characters, no symbols etc.)How to set-up a network password- Open up a web browser and type http://192.168.0.1 in the address box- Login to the router with User Name: admin , no password (leave the Passwordblank) and press the Login button (or enter your password if you already set-up one)- Click on the WIRELESS SETTINGS button on the left pane- Scroll down the page and click on the “Manual Wireless Network Setup” button- In the WIRELESS SECURITY MODE section, select “Enable WPA/WPA2 WirelessSecurity (enhanced)” from the drop-down field- In the WPA/WPA2 section, enter your 8-63 characters password- Click on the “Save Settings”button to save your settingsD-link North American support number- Tech Support web: D-Link Supportphone: 1.800.361.5265email: support@dlink.ca- Login to the router with UserName: admin , no password (leavethe Password blank) and pressthe Login button (or enter yourpassword if you already set-upone)- Click on the TOOLS tab and selectFIRMWARE on the left pane- In the FIRMWARE INFORMATIONsection, click on the “Check Now”button- Router will check to see if you have the latest versionHow to manually check for available software- Open up a web browser and typehttp://192.168.0.1 in the addressboxQuick Install GuideMobile Wireless 3G RouterThank you for purchasing the DIR-412 Mobile Wireless 3G Router. Follow the easysteps in this guide to properly set up your router. Please verify that all the packagecontents listed below are available.List of all in box itemsIf any of the above items are missing, please contact your reseller.D-Link DIR-412Power AdapterEthernet CableInstallation CD-ROMENGLISH- Login to the router with User Name: admin , no password (leave the Password blank)- Press the Login button2 3 45 6 7

/ 2

Related manuals for D-Link 13