D-Link DHP-P339AV Quick Install Manual

InstallationQuick Install GuidePackage ContentsIf any of the above items are missing, please contact your reseller.Kit includes the DHP-P338AVand DHP-308AV NetworkPowerLine Adapters2Plug the DHP-308AV Adapter into an AC wall outlet in the roomwith your router. Verify that the Power LED is lit. If not, insert intoanother outlet. Now plug the DHP-P338AV 3-Port PassthroughAdapter into an AC wall outlet. Verify that the Power LED is lit.©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiariesin the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners. Maximum throughputbased on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of traffic andnetwork overhead, may lower actual data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, mayadversely affect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch, short waveradios, or other powerline devices that do not follow the HomePlug AV standard. Product specifications, size and shape are subject to change without notice,and actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.Version 1.00(NA) (December 04, 2012) 6HPP339AQ.01GPower LED - A solid light indicates that thedevice is receiving electrical power.PowerLine LED - A solid light indicates thatthe device is connected to the PowerLineNetwork.LED Colors:Green - Link rate/quality is the best.Amber - Link rate/quality is better.Red - Link rate/quality is good.Ethernet LED - A solid light indicates thatthe Ethernet port is linked and will blinkduring data transmission.Technical SupportHaving trouble installing your new product? D-Link’s website containsthe latest user documentation and software updates for D-Link products.U.S. and Canadian customers can contact D-Link Technical Supportthrough our website or by phone.United StatesTelephone: (877) 453-5465Internet: http://support.dlink.comCanadaTelephone: (800) 361-5265Internet: http://support.dlink.caDHP-P339AVLEDs (from top to bottom)PowerLine AV+ 3-PortHD Media Starter Kit3Connect the DHP-308AV adapter to the LAN port of your router.You may now attach up to 3 Ethernet devices, such as a NAS, smartTV, or game console to the DHP-P339AV via Ethernet cables. Withthe Ethernet device powered on, verify that the Ethernet LED is liton the adapter to indicate a good connection. Setup is complete.1Ethernet Port Traffic Priority (QoS)When connecting devices to your Ethernet ports, be aware ofthe Quality of Service (QoS) priorities assigned to each portInstallation Tips1. For best results, use in a standard wall outlet without any other products plugged into the same outlet.Connecting this product to a power strip or a surge protector may adversely affect the performance of thisproduct.2. Avoid using the PowerLine adapters in an electrical outlet that is located near an appliance that uses a lot ofpower such as a washer, dryer, refrigerator, microwave, hair dryer, or air conditioning system.3. Plug the PowerLine adapters in the same room in order to verify whether your home’s electrical wiring issuitable. Once configured you may place the PowerLine adapters to the location of your choice.Port 1. Has the highest priority and gives uninterrupted service to connecteddevice that require the highest priority, such as media players or Smart TVs.Port 2. Has high priority. You can connect devices to this port that require highpriority, such as a game console.Port 3. Has medium priority and is best suited for networking data devices, suchas a printer.Once the Power LEDs are lit, verify that the PowerLine LED is liton both adapters. This indicates that your adapters are properlyconnected to each other. If the LED is not lit, insert one or bothadapters into different outlets and repeat step 2.Room 1 Room 2Adapter 1 Adapter 2Room 1 Room 2Adapter 1 Adapter 2Room 1 Room 2RouteurInternetComputerAdapter 1 Adapter 2Two Ethernet CablesGameConsoleSmart TVComputer

/ 2

Related manuals for D-Link DHP-P339AV