D-Link DGE-560T Quick Installation Manual

Also see for DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter: User manual Ethernet adapter Quick installation guide

1Краткое руководство по установкеDGE-560TСетевой PCI Express адаптер с 1 портом 10/100/1000Base-TQuick Installation GuidePCI Express Gigabit Ethernet Network AdapterКороткий посiбник зi встановленняМережевий PCI Express адаптер з 1 портом 10/100/1000Base-TINSTALLATIONPACKAGE CONTENTS- DGE-560T PCI Express Network AdapterIf any of these items are missing from your packaging, please contactyour reseller.- Quick Installation GuideENGLISHSETUP AND CONFIGURATION PROBLEMSWHAT SHOULD I DO, IF THE INSTALLED ADAPTER DOES NOTFUNCTION PROPERLY?Check whether the adapter appears under START>CONTROL PANEL>SYSTEM>HARDWARE>DEVICE MANAGER>NETWORK ADAPTERS.If it does not appear, make sure you have inserted the PCI Express adaptercorrectly or try inserting the adapter into another available PCIe slot. If itappears with an error “!” or “?”, remove or uninstall the device by rightclicking on the device. Restart your PC, upon restart Windows will redetectit. If the error persists, try removing the adapter and uninstalling the driver.Repeat the installation process.1. Turn off your PC and disconnect the power cable. Open the housing ofyour PC to get access to the motherboard.2. Insert the DGE-560T adapter carefully and firmly into any available PCIExpress slot. Secure the adapter with a screw.3. Attach the housing of your PC and reconnect the power cable. Power onyour PC.4. If you are using Microsoft Windows 7 or higher, the driver installation willbe done automatically. If the driver is not installed automatically, downloadthe driver on the DGE-560T description page from the www.dlink.comwebsite. Open a folder with the driver and run the "setup.exe" file to installthe driver.Орнату бойынша қысқаша нұсқаулық10/100/1000Base-T 1 портымен желілік PCI Express адаптері

/ 4

Related manuals for D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter