Menu
D-Link DFE-520TX Quick Installation Manual
Also see for 32-bit PCI Fast Ethernet Network Adapter DFE-520TX: Manual Manual
                |
Next, TURN OFF the computer and unplugthe power cord.Quick Installation GuideDFE-520TX10/100Mbps Ethernet PCI AdapterCheck Your Package ContentsDFE-520TX CD with Manual and DriversInstalling the DFE-520TX DriversA. Insert the driver CD, which is included with the DFE-520TX, into the CD-ROM of yourcomputer.B. Click “Install Drivers”. When prompted “Installation Complete”, click OK. If prompted torestart (for Microsoft Windows 98/ME only), click “Yes”.Installing the DFE-520TX into the computer’s PCI slotA. Power off your computer and disconnect the power cord.B. Remove the back cover of your computer. (Refer to your computer’s manual if needed.)C. Locate an available PCI slot. PCI slots are usually white or cream coloured.D. Remove the back plate (the small piece of metal that covers the opening for the PCI cardon the back cover that you just removed.)E. Insert the DFE-520TX carefully and firmly into the PCI slot.DO NOT insert the DFE-520TX into the computer’sPCI slot before installing the drivers.Caution: To avoid damage caused by static electricity, make sure to properlyground yourself by first touching a metal part of your computer to discharge anystatic electricity before working with the DFE-520TX Ethernet Adapter. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved