TransceiverDEM-310GTDEM-311GTDEM-314GTDEM-315GTD-Link Gigabit Interface Converters are transceivers that connect Gigabit switches and 10/100Mbps switches with GBIC slotsto Gigabit Ethernet networks, providing high-speed connections over the fiber-optic or twisted-pair cable. The fiber-optictransceivers have standard duplex LC connectors for connection compatibility.SFP TransceiversSmall Form Pluggable (SFP) PackageHot SwappableThese transceivers use the industry-standard Small FormPluggable (SFP) package. They slide into the mini GBICslot of the Gigabit device. They provide the necessary signalamplification for data to be transmitted to the network cablefrom the port, and vice versa, for the port to receive datafrom the network cable.All D-Link Mini GBIC transceivers are hot-swappable. Youcan remove or replace the GBIC transceiver with the systempowered on. This permits modules and mini-GBICs to beadded or swapped without interrupting the network.ApplicationsApplications of the fiber transceivers include distributedmulti-processing, Gigabit switch cascading, high-speed I/Ofile transfer, bus extension application, and channelextender/data storage.Single-mode Fiber Transceiver (10 km)DEM-310GT- 1000BASE-LX port (IEEE 802.3z standard)- Duplex LC connector- Full duplex operation- 802.3x flow control support- Fiber type: 9um single-mode fiber up to 10 km- Wave length: 1310nm- Power support: 3.3V- Power budget: 10.5dB- Hot pluggable- Class 1 laser product complies with EN 60825-1- TTL signal detect indicator- Metal enclosure for lower EMIMulti-mode Fiber Transceiver (550 m)DEM-311GT- 1000BASE-SX port (IEEE 802.3z standard)- Duplex LC connector- Full duplex operation- 802.3x flow control support- Fiber type: 50um or 62.5um multi-mode fiber up to 550 m- Wave length: 850nm- Power support: 3.3V- Hot pluggable- Class 1 laser product complies with EN 60825-1- TTL signal detect indicator- Metal enclosure for lower EMI