D-Link DCS-5020L User Manual

Also see for DCS-5020L: User manual Quick installation guide Quick install guide User manual Quick installation guide

Contents

23D-Link DCS-5222L User ManualSection 4 - ConfigurationInternet Connection Setup WizardThis wizard will guide you through a step-by-step process toconfigure your new D-Link Camera and connect the camerato the Internet. Note that this wizard will not register yourcamera with mydlink.com.Click Next to continue.Select Automatic IP Address if you want your DHCP server(usually enabled on your router) to assign the camera its IPsettings. If you want to manually assign the IP settings, selectStatic IP Address and enter the following details:Enter an IP address for your camera.Enter the subnet mask of your network.Enter the default gateway address. This isusually the IP address of your router.Enter the primary DNS server’s IP address. Thisis usually the IP address of your router.Enter the secondary DNS server’s IP address.This is optional.Click Next to continue.IP Address:Subnet Mask:Default Gateway:Primary DNS:Secondary DNS: