D-Link DCS-1100 Quick Install Manual

Also see for DCS-1130 - mydlink-enabled Wireless N Network Camera: User guide Install guide Install guide User manual Specifications

ENGLISH Quick Install GuideWired Network Camera/Wireless N Network CameraThank you for purchasing the DCS-1100/DCS-1130 Network Camera. Follow the easysteps in this guide to properly set up your adapter. Please verify that all the packagecontents below are available.DCS-1100/1130If any of the above items are missing, please contact your reseller.Technical SupportHaving trouble installing your new product? D-Link’s website contains the latestuser documentation and software updates for D-Link products. U.S. and Canadiancustomers can contact D-Link Technical Support through our website or by phone.United StatesTelephone: (877) 453-5465Internet: http://support.dlink.comCanadaTelephone: (800) 361-5265Internet: http://support.dlink.caCopyright ©2010 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of networktraffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors willadversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual productappearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.Version 1.0 | June 10, 2010 6DCS1100Q.02GPackage ContentsDCS-1100 Wired Network Camera / DCS-1130 Wireless N Netowrk CameraCamera Base and Mounting KitCAT-5 Ethernet CablePower AdapterCD with drivers and software• An Internet connection• A router connected to your broadband router• A PC running Windows ® XP or Vista ® (32/64-bit) with Internet Explorer ® 6 or higherand ActiveX® controls enabledSystem RequirementsStep 1:Insert the DCS-1100/1130 Driver CD in the CD-ROM drive.Note: Vista ® users will need to be logged in to an account with administrativeaccess to use the D-Link Installation Wizard.If the CD Autorun function does not automatically start on your computer, go toStart > Run. In the run box type “D:\autorun.exe” (where D: represents the driveletter of your CD-ROM drive) and click OK. When the autorun screen appears, clickInstall and follow the on-screen instructions.Step 2:Click on the Start button to start the wizard, and follow the instructions from theInstallation Wizard to finish setting up your camera.Step 3:Open Internet Explorer and go to http://www.mydlink.com, and sign into mydlink.Step 4:Select your camera from the device list, and your camera’s Live View will appear.Installation1. What can mydlink.com do for me?mydlink.com provides users with a quick and easy way to view or managemultiple cameras over the Internet. You can add your camera to yourmydlink.com account after running the Installation Wizard. Users can sign in tomydlink and access their devices under their account from a PC connected to theInternet anytime, anywhere.2. What is mydlink No.? What is it used for?Each camera has a unique 8-digit mydlink No. which will be shown on the labelon the back of your camera. This 8-digit number identifies your device, and isrequired to add your device to your mydlink.com account.3. What can I do if my DCS-1100/1130 is not working correctly?• Try using the wizard on the included CD.• To make sure your hardware is installed correctly, make sure that:- the front LED is lit solid green- your Internet connection is workingTroubleshooting- your router’s LAN & WAN connections are ok- your router supports UPnP®- your camera is on the same network as your PC- both your PC and camera have a working Internet connection• If your camera is still not working, check your router and make sure it is usingthe latest firmware.4. I cannot run the CD wizard. How do I install my DCS-1100/1130?You can install your camera by using the online wizard:• DCS-1100: http://dcs-1100.mydlink.com• DCS-1130: http://dcs-1130.mydlink.com5. I cannot run the CD wizard. How do I install my DCS-1100/1130?• Connect the camera directly to the computer’s Ethernet port.• Assign your computer a static IP address within the same range as thecamera, such as 192.168.0.113.• Access and set up your camera via the default IP address ofhttp://192.168.0.20.• For more information, please refer to the User Manual.Note: If you do not have a router, you will not be able to remotely accessyour camera.

/ 2

Related manuals for D-Link DCS-1130 - mydlink-enabled Wireless N Network Camera