64Q: What network cabling is required for DCS-1000?A: DCS-1000 uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking.Q: Can DCS-1000 be setup as a PC-cam on the computer?A: No, DCS-1000 is an Internet Camera used only on Ethernet and FastEthernet network.Q: Can DCS-1000 be connected on the network if it consists of only privateIP addresses?A: DCS-1000 can be connected to LAN with private IP addresses.Q: Can DCS-1000 be installed and work if a firewall exists on the network?A: If a firewall exists on the network, port 80 is open for ordinary datacommunication. However, since DCS-1000 transmits image data, the defaultport 8481 is also required. Therefore, it is necessary to open port 8481 of thenetwork for remote users to access DCS-1000.
