D-Link DAP-1525 Quick Install Manual

Also see for AMPLIFI DAP-1525: User manual Quick installation guide Quick installation guide User manual Quick install guide

Contents

package contents

Access Point Mode - Upgrade your wireless connectionMediaBridge® Mode - Connect media devices to your wireless networkStart HereQuick Install GuideAccess Point Mode - Upgrade your wireless connectionUse Access Point mode if you want to connect wireless devices such as laptops, tablets, smart phones, and media playersto your wired network (via router or switch). Use this mode to upgrade your wireless network to the latest wirelesstechnology to boost performance and coverage.Installation Tip:If you already have a WPS-ready wireless router or access point, you can use the One Touch AP Configuration to copyyour existing wireless settings to the DAP-1525. You can then disable the wireless function in your existing wireless routeror AP to avoid wireless interference. If you do not have an existing wireless router or AP with WPS, use Manual Setup.Package ContentsIf any of the above items are missing, please contact your reseller.DAP-1525 Access Point/MediaBridge®Ethernet CablePower AdapterCD-ROM with Manual3Attach the power adapter to apower outlet or surge protector.If the Power LED is not lit, pressthe Power button to turn on.4Press the WPS button on your existing wireless routeror access point.WPS Button 5For One Touch Configuration, pressand hold the WPS button on theDAP-1525 for about 5 seconds.The WPS LED will blink.WPSButton6Once finished, you must connect an Ethernet cable from the DAP-1525 toyour LAN port on your router.1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GDAP-1525Smartphone / TabletLaptopRouterInternet3 43Attach the power adapter to apower outlet or surge protector.If the Power LED is not lit, pressthe Power button to turn on.4Press the WPS button on your existing wireless routeror access point. The WPS LED will start to blink.Attach the power adapter to apower outlet or surge protector.If the Power LED is not lit, pressthe Power button to turn on.Connect the DAP-1525 to your computerwith an Ethernet cable.1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GPowerDAP-1525Laptop or Desktop5For WPS Setup, press and hold the WPSbutton on the DAP-1525 for about 1second. The WPS LED will blink.6Once finished, you may connect up to 4 Ethernet (wired) devices tothe DAP-1525 and connect to your existing wireless network. Notethat wireless devices cannot connect to the DAP-1525 wirelessly when inMediaBridge mode.1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GDAP-1525 GamingConsoleDigitalMediaPlayerHDTVStorageRouterExisting NetworkInternetNext, open a web browser andenter http://dlinkap in theaddress field.5Enter admin for the user name and leavethe password blank. Click Log In.6Click Launch Wireless Setup Wizard andfollow the on-screen instructions to quicklyconfigure your DAP-1525.7©2011 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registeredtrademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Othertrademarks or registered trademarks are the property of their respective owners.Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and 802.11n specifications.Actual data throughput will vary. Network conditions and environmental factors, including volume ofnetwork traffic, building materials and construction, and network overhead, lower actual data throughputrate. Environmental conditions will adversely affect wireless signal range.Product specifications, size and shape are subject to change without notice, and actual product appearancemay differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.Wireless LED (AccessPoint Mode) - A solidgreen light will indicate that Access Point Modeis on.Wireless LED (MediaBridge® Mode) - A solidgreen light will indicate that Bridge Mode is on.WPS LED/Button - Will blink during WPS/OneTouch Configuration process, then will be solidgreen for 5 seconds if a successful connectionhas been made.Power LED/Button - A solid light indicates aproper connection to the power supply. Pressthe button to turn the power on and off.DAP-1525LEDs (from top to bottom)1 Which Mode Should I Use?Manual Setup (All Modes)1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5G2With the DAP-1525 poweredoff, slide the selector on theback of the device to AP2.4GHz or AP 5GHz.2With the DAP-1525 poweredoff, slide the selector on theback of the device to BRIDGE.1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GPowerDAP-15252With the DAP-1525 poweredoff, select the mode you wantto use by sliding the selectoron the back of the device.U.S. and Canadian customers can contact D-Link technical support through our web site or byphone. You can find software updates and user documentation on the D-Link website as wellas frequently asked questions and answers to technical issues.Before you contact technical support, please have the following ready:• Model number of the product (e.g. DAP-1525)• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))• Serial Number (s/n number located on the label on the bottom of the product).United StatesInternet: http://support.dlink.comCanadaInternet: http://support.dlink.caTechnical SupportVersion 1.1 (September 28, 2011)1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GDAP-1525Smartphone / TabletLaptopRouterInternet1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GDAP-1525 GamingConsoleDigitalMediaPlayerHDTVStorageRouterExisting NetworkInternetMediaBridge® Mode - Connect media devices to your wireless networkUse MediaBridge mode if you want to connect Ethernet devices such as computers, game consoles, NetworkStorage (NAS) devices, and media players to your existing wireless network. With the DAP-1525 you can connectup to 4 devices to your wireless network. Note that wireless devices cannot connect to the DAP-1525 wirelesslywhen in MediaBridge mode.Installation Tip:If you already have a WPS-ready wireless router or access point, you can use the WPS Setup to automaticallyconfigure and connect to your wireless network by simply pressing a button. If not, use Manual Setup.WPSButton1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GWPS Button1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5G1234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GPowerDAP-15251234LANUSB5V- - - 2.5AAP2.4GBRIDGE AP5GPowerDAP-1525OR

/ 1

Related manuals for D-Link AMPLIFI DAP-1525