D-Link DAP-1360/B User Manual

48D-Link DAP-1360 User ManualSection 3 - ConfigurationWAN SettingsDynamic IP (DHCP)WAN settings are only used in the WISP Client Router wireless mode and the WISP Repeater wireless mode. ChooseDynamic IP(DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP doesnot give you any IP number to use. This option is commonly used for Cable modem services.Host Name:MTU Size:Attain DNSAutomatically:Set DNS manually:DNS Server:Clone MAC Address:The Host Name is optional but may berequired by some ISPs.You may need to change the MTU (MaximumTransmission Unit) for optimal performancewith your speciic ISP. The default MTU sizeis 1500.Select this option if you want the DAP-1360to get the DNS (Domain Name System)server IP address automatically.Select this option if you want to manuallyenter the DNS Server IP address(es). Thefields to enter the Primary and SecondaryDNS server IP addresses will appear after you have selected this option.Enter the Primary and Secondary DNS server IP address assigned by your ISP.The default MAC address is set to the Ethernet MAC address your DAP-1360. You can click the Clone Your PC’s MACAddress button to replace the AP’s MAC address with the MAC address of the PC that you used to register with your ISP.It is not recommended that you change the default MAC address unless required by your ISP.