D-Link DAP-1155 User Manual

Also see for DAP-1155: User manual Quick installation guide Quick install guide User manual Quick installation guide

DAP-1155 Wireless N150 Access Point & RouterUser Manual Configuring DeviceMAC FilterOn pages of the the Wi-Fi / MAC Filter section, you can define a set of MAC addresses of deviceswhich will be allowed to access the WLAN, or define MAC addresses of devices which will not beallowed to access the WLAN.Figure 85. The page for configuring the MAC filter for the wireless network.By default, MAC filtering is not active (the Disabled value is selected from the MAC filterrestrict mode drop-down list on the Wi-Fi / MAC Filter / Filter mode page).To open your wireless network for the devices which MAC addresses are specified on the Wi-Fi /MAC Filter / MAC addresses page and to close the wireless network for all other devices, selectthe Allow value from the MAC filter restrict mode drop-down list and click the Apply button.To close your wireless network for the devices which MAC addresses are specified on the Wi-Fi /MAC Filter / MAC addresses page, select the Deny value from the MAC filter restrict modedrop-down list and click the Apply button.To add a MAC address to which the selected filtering mode will be applied, proceed to the Wi-Fi /MAC Filter / MAC addresses page.Page 101 of 158