D-Link COVR-C1202 User Manual

Also see for COVR-C1200: User manual User manual Manual Technical Support Setup Procedure User manual

71D-Link COVR-C1202 User ManualSection 5- Connecting a Wireless ClientConnect to a Wireless ClientWPS ButtonThe easiest way to connect your wireless devices to your Covr Wi-Fi network is with WPS (Wi-Fi Protected Setup). Most wirelessdevices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS buttonthat you can press to connect to the Covr Point. Please refer to your user manual for the wireless device you want to connect tomake sure you understand how to enable WPS. After consulting your device's manual, follow the steps below:Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPSprocess).Step 1 - Press the WPS button on the nearest Covr Point for about 1 second. The COVR LED on the front will start to blink white.Step 3 - Allow up to 1 minute for your connection to be configured. Once the COVR LED stops blinking, you will be connectedand your wireless connection will be encrypted with WPA2.WPS Button