D-Link AC750 Quick Installation Manual

Also see for AC750: User manual User manual User manual User manual User manual

INSTALLATION• DAP-1530 || AC750 Mesh Wi-Fi Range Extender• Quick Installation Guide• Quick Installation CardENGLISHPACKAGE CONTENTSD-LINK WI-FI APP SETUPQuick Installation GuideDAP-1530AC750 Mesh Wi-Fi Range ExtenderPlug the Range Extender into a poweroutlet near your router.Download the D-Link Wi-Fi appand launch it.1 / 2 /D-Link Wi-FiD-Link Wi-FiTap Install New Device. Scan the QRcode on the Quick Installation Card.Follow the on-screen instructions tocomplete the setup.3 /Model Name: DEVICEWi-Fi Name: dlink-XXXXPassword: XXXXXXXXS/N: 123456789SETUP QR CODEThis D-Link product includes software code de-veloped by third parties, including software codesubject to the GNU General Public License (“GPL”)or GNU Lesser General Public License (“LGPL”). Asapplicable, the terms of the GPL and LGPL, andinformation on obtaining access to the GPL codeand LGPL code used in this product, are availableto view the full GPL Code Statement at:https://tsd.dlink.com.tw/GPLThe GPL code and LGPL code used in this productis distributed WITHOUT ANY WARRANTY and issubject to the copyrights of one or more authors.For details, see the GPL code and the LGPL codefor this product and the terms of the GPL andLGPL.Written Offer for GPL and LGPL Source CodeWhere such specific license terms entitle youto the source code of such software, D-Link willprovide upon written request via email and/ortraditional paper mail the applicable GPL and LG-PLsource code files via CD-ROM for a nominal costto cover shipping and media charges as allowedunder the GPL and LGPL.Please direct all inquiries to:Snail Mail: Email:Attn: GPLSOURCE REQUESTD-Link Systems, Inc.17595 Mt. Herrmann StreetFountain Valley, CA 92708GPLCODE@dlink.comGPL CODE STATEMENTi2020/09/02_90x130 v2.00(CA)Having trouble installing your new product? D-Link’s support websitecontains live chat, video tutorials, commonly asked questions, thelatest user documentation and software updates for D-Link products.TECHNICAL SUPPORTCanadahttps://support.dlink.ca/DAP-1530YouTube.com/DLinkTutorialsD-LINK WI-FI MESHYou can easily can pair your AC750 Mesh Wi-Fi Range Extender(DAP-1530) with any D-Link Wi-Fi Mesh-enabled Router to create aseamless mesh network that covers every corner of your home.FREQUENTLY ASKED QUESTIONS?Why can’t I connect wirelessly or my wireless connection drops?1. Verify that your Range Extender is within range of your wireless router. Tryplugging it into a location closer to the router and verify the Status LED issolid green.2. Note that when extending a wireless signal from a router or access point,devices connected to the Range Extender will not get the same speed/throughput as when connected directly to the router.How do I change the wireless settings on my Range Extender?1. Open a web browser (e.g., Internet Explorer, Firefox, Chrome, or Safari) andgo to the URL found on the QIC or on the back of the Range Extender(i.e., http://dlinkapXXXX.local./).2. At the login screen, enter your Admin Password (If WPS Setup was used, thepassword is “password” by default) and click Log in.3. Go to Settings > Extender.4. Enter a new Wi-Fi Network Name (SSID) and modify the security (Wi-Fipassword) settings as needed.5. Click Save.What is Mesh Smart Roaming?With Mesh Smart Roaming, your Wi-Fi device (e.g. SmartPhone, Tablet) willautomatically roam to the strongest Wi-Fi signal, eliminating the need toswitch between your Router’s and Range Extender’s Wi-Fi signal as youmove around your home.Mesh Smart Roaming Requirements:1. The Wi-Fi device (e.g. SmartPhone, Tablet) must support the 802.11k/vstandard.2. The Wireless Name (SSID) & Wireless Password must be the sameon both the Mesh Wi-Fi Range Extender and your Wireless Router.What if I forgot my Range Extender’s Admin passwordor want to reset my Range Extender?1. If you forgot your Admin password or want to reset yourRange Extender back to the factory default settings, pressand hold the reset button on the top of the extender usinga paper clip and release after the Status light turns red.Note: This process will erase all your settings.2. Setup your Range Extender using your preferred method.ResetButtonDid you know? From automatic firmware updates to seeing what devices are connected to your network, the D-Link Wi-Fi app makessetup and management of your Range Extender quick and simple.Tip: Before you start, make sure you knowyour current router’s Wi-Fi name andpassword as you will need this info tocomplete the setup.Setup and How To videos available here:YouTube.com/DLinkTutorialsHow do I setup my Range Extender using WPS?1. Plug your Range Extender into an available outlet nearyour wireless router and wait until the Status LED isblinking amber (this may take up to 3 minutes). You canmove it to a more suitable location after it is set up.2. Press the WPS (Wi-Fi Protected Setup) button on yourwireless router for 3 seconds. An LED should startblinking on your router. If it does not blink, see theimportant note above.3. Once confirmed that the WPS light is blinking on yourrouter, within one minute, press the WPS button on yourRange Extender for 2-3 seconds. The Status LED shouldstart to blink green.4. When the Status LED turns solid green (may take up to 3 minutes),this indicates that your Range Extender is securely connected to yourwireless router.Your setup is complete! You can now unplug and move your Range Extenderto a location between your Wireless Router and the area where you wantwireless coverage. By default, your Range Extender will share the sameWi-Fi name and password as your Router. When using WPS setup, the defaultAdmin Password is “password”.If after moving your Range Extender, the signal strength indicator is showingone single amber bar or if your Range Extender LED does not turn solidgreen within 3 minutes, move your Range Extender to a wall outlet closerto your wireless router.IMPORTANTWPS may be disabled on some Routers or Modems. If the WPS Status LED on your Routeror Modem does not start blinking when you have pressed the WPS button, try again andhold it a little longer. If it still does not blink, please configure your Range Extender byusing the D-Link Wi-Fi App.Signal Strength IndicatorWeak (1 x Green) Good (2 x Green) Strong (3 x Green)

/ 2

Related manuals for D-Link AC750