D-Link AC3900 COVR-3902 Simple Setup Manual

Also see for COVR-3902: Faqs User manual

For more support, please visit: support.dlink.ca/COVR-3902 1.800.361.5265Antenna x4Covr RouterCOVR-2600RWi-FiCardCovr ExtenderCOVR-1300EPowerAdapter x2EthernetCableBefore You Start1Browser Setup (PC/Mac/Mobile device)D-Link Wi-Fi App (iOS and Android Devices)1 You can use either a wired (Ethernet) or wireless (Wi-Fi)connection to set up your Covr Wi-Fi System.Wired – Connect the Ethernet port on your computer toone of the four black ports on the Covr Router.Wireless – Connect to the Covr Wi-Fi using the Wi-Fi Name andPassword on the Wi-Fi Configuration Card or the Covr Router.2 Type http://covr.local./ into a web browser and follow theinstructions to complete the setup.Check the contents of your Covr Wi-Fi System withthe list on the right. Be sure to keep the Router andExtender close to each other during the setup process.Connect the four antennas to the router by screwingthem in clockwise.Download the D-Link Wi-Fi app from the App Store orGoogle Play. Run the app and tap Add Device to get started.There are two easy ways to configure yourCovr Wi-Fi System:AC3900 WHOLE HOME WI-FI SYSTEM | COVR-3902Simple Setup Guide12Connect the power adapter to the Covr Router andplug it into a power outlet. Wait for the 2.4G and 5GLEDs to light up solid green and then proceed to thenext step.TIP: If the Power LED does not light up, press thePower button on the back of the Router.3D-Link Wi-FiVersion 1.02(CA) | 2017/06/29 6CV3902...D3G

/ 2

Related manuals for D-Link COVR-3902