DSL-502G ADSL Router User’s Guide68DDSL-502G Firmware Upgrade UtilityYou can update system firmware using the DSL-502G Firmware Upgrade Utility. To upgrade the Router’sfirmware, first install the Upgrade Utility software on a computer running a Windows operating system. Installthe utility by clicking the file titled setup.exe located on the Installation CD-ROM. It will be installedautomatically. It is recommended that the PC be directly connected to the Router using a crossed cable, howeveryou may upgrade it through the LAN from a remote host.You also need to download the latest firmware version file from the D-Link web site to the PC on which you willuse the Upgrade Utility. Instructions for downloading the firmware are located on the web site atwww.dlink.com.To launch the DSL-502G Firmware Upgrade Utility, click on the icon. Allow a few moments for the software todiscover the Router on the network. After the discovery phase the following window will appear. You will seeall the DSL-502G Routers on your network. You can identify individual devices by either its IP address or itsMAC address. Select the device you wish to upgrade by double clicking on it.When you select a Router to upgrade you will be prompted for a password. The default password is admin. Ifyou want to change the password, you can change it using the console manager interface as described in Chapter6.Enter the password and click OK.
