6HITCH & BAG SUPPORTINSTALLATIONHitch Installation1. Attach hitch assembly (B, Figure 4) to frame (A).Secure with 3/8-16 x 1-3/8 capscrews (E), washers(I), washers (C) and nut (D) as shown. Finger tightenat this time.2. Install 1/2-13 x 1-1/4 capscrew (G) through drawbar(H) and tighten.3. Tighten all hardware.Bag Support Installation1. Set bag support tube (B, Figure 5) onto hitch assem-bly post (D).2. Insert bag support posts (A) into hitch assemblytubes (C). Make sure that support posts insert com-pletely into tubes.Figure 5. Install Bag SupportA. Bag Support PostsB. Bag Support TubeC. Hitch Assembly TubesD. Hitch Assembly PostCBACDAFigure 4. Install Hitch Assembly, without WeightsA. FrameB. Hitch AssemblyC. Washers, 3/8D. Locknuts, 3/8E. Capscrews, Hex, 3/8-16 x 1-3/8F. Locknut, 1/2-13G. Capscrew, 1/2-13 x 1-1/4H. DrawbarI. Washers, 11/32 x 1-3/4DEECCCFAGHBAII

Craftsman ZTS 7500 Operator's Manual

Product

Learn More

Legal