Craftsman Versatrack Instruction Manual

ENGLISHVersatrack™ WARNING: To reduce the risk of serious personalinjury, do not use a damaged Versatrack™ hook orVersatrack™ Trackwall. A damaged Versatrack™ hookor Versatrack™ Trackwall will not support the weightof the tool. WARNING: To reduce the risk of serious personalinjury, ensure the screw holding the Versatrack™ hookis securely tightened. WARNING: To reduce the risk of serious personalinjury, ensure the fitting holding the hang hookis secure. WARNING: To reduce the risk of serious personalinjury, DO NOT suspend tool overhead or suspendobjects from the hook. ONLY suspend tool on theVersatrack™ Trackwall using the hook. WARNING: Ensure that the tool weight does notexceed the maximum rated weight of 20 lb (9 kg) forthe selected Versatrack™ hook. WARNING: When hanging objects on a Versatrack™Trackwall rail, adequately space the tools in order tonot exceed 75 lb (35 kg) per linear foot.NOTE: Versatrack™ accessories for use with your tool areavailable at extra cost from your local dealer or authorizedservice center. If you need assistance in locating anyaccessory, please contact CRAFTSMAN, call 1-888-331-4569.Cordless (Fig. A) WARNING: To reduce the risk of serious personalinjury, turn unit off and remove the battery packbefore making any adjustments or removing/installing attachments or accessories. Anaccidental start-up can cause injury.IMPORTANT: When attaching the Versatrack™ hanghook, use only the screw that is provided. Be sure tosecurely tighten the screw. Versatrack™ accessoriesmount compatible tools securely to the Versatrack™Trackwall system.1. Turn tool off, remove the battery pack andremove accessories. CAUTION: Any product with exposed cutting teethmust have them covered securely if it is to be onthe Versatrack™ Trackwall.2. Attach the hang hook on the tool.a. Place the Versatrack™ hang hook 1 onto themounting location at the base of the tool as shown.b. Use a screwdriver to secure the hang hook withthe provided screw 2 . Do not use any other screwfor this.1Fig. A2Corded (Fig. B) WARNING: To reduce the risk of serious personalinjury, turn unit off and disconnect it frompower source before making any adjustments orremoving/installing attachments or accessories.An accidental start-up can cause injury.IMPORTANT: Versatrack™ accessories mount compatibletools securely to the Versatrack™ Trackwall system.1. Turn tool off, disconnect it from power source andremove accessories. CAUTION: Any product with exposed cutting teethmust have them covered securely if it is to be onthe Versatrack™ Trackwall.2. Mount the peg hook 3 to the Versatrack™ Trackwallwith the CRAFTSMAN logo properly oriented as shown.3. Slide the tool loop 4 to the base of the peg hook.NOTE: Ensure that the tool loop slides all the way to thebase of the peg hook. This relieves strain on the peg hookand trackwall and may prevent the tool from falling.Fig. B34Pneumatic (Fig. C) WARNING: To reduce the risk of serious personalinjury, remove the air supply before making anyadjustments or removing/installing attachmentsor accessories. An accidental actuation cancause injury.IMPORTANT: Versatrack™ accessories mount compatibletools securely to the Versatrack™ Trackwall system.1. Remove the air supply and accessories.INSTRUCTION MANUALMANUEL D’INSTRUCTIONSMANUAL DE INSTRUCCIONESIF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THISOR ANY CRAFTSMAN TOOL, CALL US TOLL FREE AT:888-331-4569.

/ 4

Related manuals for Craftsman Versatrack