Menu
Craftsman CMXZDCG440 User Manual
Also see for CMXZDCG440: Quick guide
  |
Enter a 4-digit personal identificationnumber (PIN) of your choice:Then press the # button.2? ? ? ?4The garage dooropener will activate.7 To test, enter yourPIN, then pressthe ENTER button.Press and holdthe and #buttons until thelights on thekeypad stopblinking.1*3 Press and release the Enter button on the keypad a number oftimes that corresponds with the garage door opener type:# of Presses Garage Door Opener Type1234Security+ 2.0 ® (Yellow Learn Button)Security+® (Purple Learn Button)Security+® (Red/Orange Learn Button)Billion Code (Green Learn Button)LearnButton5 Press and release the Learnbutton on the garage dooropener.Within 30 seconds...The Learn LED will light.Enter your 4-digit PIN, then press andrelease the ENTER button until the garagedoor opener lights flash or two clicks areheard.6ClickClickLocate the Learn button on the garage dooropener.NOTE: Your garage door opener maylook different.LearnLEDLearnLEDOR ORLearnLEDGreen orRed/Orange Purple YellowPROGRAM INITIAL PINCHANGE AN EXISTING PIN*1? ? ? ?Press the programmed PINthat you want to change....the light bulb blinks twice.2 Press and hold the# button until...3+? ? ? ?new PINEnter the new 4-digit PIN of your choice,then press the ENTER button.4 To test, press the new PIN,then the ENTER button.The garage door openerwill activate.The light bulb will blink once.PREPAREOnce the garage dooropener type is selected,press the 0 button.REFER TO GARAGE DOOR OPENER MANUAL FOR DETAILED INSTALLATION, ADJUSTMENTS, AND SAFETY INFORMATION.To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:• Install keypad within sight of the garage door, out of reach of children at a minimum height of 5 feet (1.5 m), and away from ALL moving parts of door.• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.* For garage door openers that have a green Learn button or an external receiver repeat "Program Initial PIN" to change the existing PIN.To program the keypad to more than one garage door opener, repeat the steps above using a new PIN for each additional garage door opener.®WIRELESS KEYPAD • MODEL CMXZDCG440Compatible with garage door openers manufactured after January 1, 1993.Make sure the garage door opener has a working light bulb because it is aprogramming indicator.Install the battery and program the keypad prior to installation.WARNING: This product can expose you to chemicals includinglead, which are known to the State of California to cause cancer orbirth defects or other reproductive harm. For more information goto www.P65Warnings.ca.gov. |
Related manuals for Craftsman CMXZDCG440
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved