Craftsman CMXGVAM1144043 Fast Start Manual

778-15657© 2018 34M CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.Using four clevis pins and four cotter pinsfrom the manual bag, install the labeledtines onto the tine shaft inner tines first, thenthe outer tines and exactly as shown.A1 A2B1B2B2 B1 A2A1Remove the remaining clevis pin and cotterpin from the manual bag, install the wheelassembly into the chain case bracketRemove the two screwsfrom the bracket in thechain case. Insert thehorizontal bracket into thechain case brackets andsecure the depth stakeassembly in place with thescrews just removedRemove the bolts, washers and nuts fromthe chain case bracket. Place the handle intoposition and secure with the previously removedhardware.Remove the handleadjustment crank fromthe handle. Rotate thehandle upward andsecure it in place withthe handleadjustmentcrank.When the handle is in place, insert theclutch cable into the cable guide on thehandleTools Required:• 1/2-inch wrench (or adjustable wrench)HandleTinesDepth StakeHandleAdjustment CrankClutch Lever1 42 53 6READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLYAND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.Need Help?www.CRAFTSMAN.com or Call 1-888-331-4569Fast Start Guide - Assembly

/ 2

Related manuals for Craftsman 21B-34M8793