Menu
Craftsman CMMT25166 Instruction Manual
                |
English4Magnets (Fig. A) CAUTION: When the LED light hangs by the magnet,do not shake the LED light or the object from whichit hangs. Do not hang the work LED light overheador from anything that is not secure. Personal injury orproperty damage may occur. CAUTION: Only use the magnet for hanging the LEDlight. The magnet are not intended to support additionalweight. Do not attach or hang anything additional to theLED light or risk of breakage may occur.1. The CMMT25166 has a built in magnet 7 located at theend of the housing 2 .2. The magnet 7 is intended for catching small metal partssuch as screws and bolts and is also intended to hold thelight in place on solid metal surfaces.OPERATION CAUTION: Do not stare into the LEDs. Serious eyeinjury could result.Register OnlineThank you for your purchase. Register your product now for:• WARRAnTY sERViCE: Registering your product willhelp you obtain more efficient warranty service in casethere is a problem with your product.• COnFiRMATiOn OF OWnERshiP: In case of aninsurance loss, such as fire, flood or theft, your registrationof ownership will serve as your proof of purchase.• FOR YOUR sAFETY: Registering your product will allowus to contact you in the unlikely event a safety notificationis required under the Federal Consumer Safety Act.• Register online at www.craftsman.com/registrationRepairsThe work light is not serviceable. The LED light bulbs andbattery cannot be replaced by the user.Accessories WARNING: Since accessories, other than thoseoffered by CRAFTSMAN, have not been tested withthis product, use of such accessories with this productcould be hazardous. To reduce the risk of injury, onlyCRAFTSMAN recommended accessories should be usedwith this product.There are no accessories for this product.Cleaning WARNING: Never use solvents or other harshchemicals for cleaning the non-metallic parts of thetool. These chemicals may weaken the plastic materialsused in these parts. Use a cloth dampened only withwater and mild soap. Never let any liquid get inside thetool; never immerse any part of the tool into a liquid.MAINTENANCEYour CRAFTSMAN product has been designed to operateover a long period of time with a minimum of maintenance.Continuous satisfactory operation depends upon proper careand regular cleaning.Multi Function Button (Fig. A)The LED lights have one brightness setting.1. Press the multi function button 1 once to activate theside LED 5 .2. Press the multi function button 1 a second time toactivate the spot light LED 6 .3. Press the multi function button 1 a third time to turn theLEDs OFF.The RBRC® SealPlease take your CRAFTSMAN productwith a spent battery to an authorizedCRAFTSMAN service center or to your localretailer for recycling. In some areas, it isillegal to place spent battery packs in the trash. You may alsocontact your local recycling center for information on whereto drop off the spent battery pack. Do not place in curbsiderecycling. For more information visit www.call2recycle.org.or call the toll free number in the RBRC® Seal.RBRC® is a registered trademark of Call 2 Recycle, Inc.SPECIFICATIONSCMMT25166Voltage VDC 5Battery type 10800Li‑IonLumensSide LED lm 300Spot light LED lm 180LUX at two metersSide LED lx 35Spot light LED lx 260Run Time When Fully ChargedSide LED hour 2Spot light LED hour 3Charging temperature range 40 °F – 104 °F4 °C – 40 °COperating temperature range 14 °F – 140 °F‑10 °C – 60 °CStorage temperature range 14 °F – 140 °F‑10 °C – 60 °C |
Related manuals for Craftsman CMMT25166
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved