Menu
Craftsman 950156 Operator's Manual
                |
• Study, understand, and follow allinstructions with and on this devicebefore operating this device.• Do not exceed rated capacity.• Use only on hard, level surface.• This is a lifting device only. Immediatelyafter lifting, support the vehicle withappropriately rated vehicle stands.• Do not move or dolly the vehicle whileon the jack.• Failure to heed product markings orwarnings may result in personal injuryor property damage.Leer, comprender, y seguir las instruccionesantes de utilizar el aparato. El manualde instrucciones y la informacion deseguridad deben estar comunicado enlengua del operador antes del uso. Noseguir estas indicaciones puede causardanos personales o materiales.To avoid crushing andrelated injuries:NEVER work on,under or around a load [supported only by jack.ALWAYS use adequatelyrated jack stands.! SAFETY MESSAGE !Be sure all tools and personnel are clearbefore lowering load. No alterationsshall be made to this product. Onlyattachments and/or adapters supplied bythe manufacturer shall be used. Lift onlyon areas of the vehicle as specified by thevehicle manufacturer.NOTE: Jack stands are rated per pairunless otherwise noted.Use 1 matched _ per vehicle only.A T _, vTO ASSEMBLE THE TWO PIECEHANDLE• Locate the spring pin on bottom end of upperhandle and the spring pin receiver on theupper end of lower handle. (Fig. 1).• Align the spring pin with the spring pinreceiver. Connect the two handle piecestogether by pressing the spring pin andinsert until the spring pin is locked in thespring pin receiver.TO ASSEMBLE THE HANDLE INTOTHE SOCKET1. Press and hold the handle socket to loosenthe lock pin (Fig. 2).2. Pull out the lock pin, then release handlesocket slowly.,_l_Caution: Handle socket is spring loaded.Beware of pinching on fingers duringremoval of lock pin.3. Pull and hold the spring knob (Fig. 3).4. Insert the assembled handle into thesocket, until it is firmly seated.5. Release spring knob to secure the handlein position.S/p,rin g Pin/ /Spring Pin ReceiverUpper HandleLower Han_dllFIG. 1FIG. 2Handle Socket_o / ®hold the"_"_'_.,_ position of HandletL.(_] Socket in packaging)Assembled _._, Handle SocketHandle ---_ /_Spring Knob ---______FIG. 3 |
Related manuals for Craftsman 950156 Operators
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved