Craftsman 81079 Owner's Manual

Also see for 81079: Owner's manual

25FUSE REPLACEMENTWARNING: To avoid electric shock, disconnect the test leadsfrom any source of voltage before removing the battery cover.1. Disconnect the test leads from the meter.2. Remove the protective rubber holster.3. Remove the battery cover (two “B” screws).4. Disconnect and remove the battery.5. Remove the four “A” screws securing the rear cover.6. Remove the rear cover.7. Lift the center circuit board straight up from the connectors togain access to the fuse holders.8. Gently remove the old fuse and install the new fuse into theholder.9. Always use a fuse of the proper size and value (0.5A/250V fastblow for the 400mA range, 20A/250V fast blow for the 20Arange).10. Align the center board with the connectors and gently pressinto place.11. Replace and secure the rear cover, battery, battery cover andscrews.WARNING: To avoid electric shock, do not operate your meteruntil the battery cover is in place and fastened securely.

/ 26

Related manuals for Craftsman 81079