Craftsman 706.132880 Operator's Manual

I € RFIFTSM RN°IOperator's ManualBALL BEARING SERIESPlease indicate the following information from the servicepart drawing provided.Model Number:Model Description:*Product you purchased may vary from picture shown*CAUTION:Read and follow all Safety Rules and Operating Instructions before first useof this product. Retain this document for future reference.Sears, Roebuck and Co., Hoffman Estates, IL 60179 USASAFETY WARNINGS AND CAUTIONS:• DO NOT stand on this product. You may fall which may cause personal injury.• WEAR SAFETY GLASSES AND GLOVES when cutting the banding material. Thebands may snap which may cause personal injury.• WEAR SAFETY GLASSES when removing or repositioning the slides. The toolcould slip which may cause personal injury.• When moving this product, do not pull it. Push the product to prevent personalinjury.• Handle and swivel casters must be attached on the same side of the product.• USE THE BRAKES when not moving this product. This will prevent the productfrom rolling, which may cause personal injury or product damage.• BE CAREFUL when opening more than one drawer. The product may becomeunstable and tip, which may cause personal injury or product damage.• DO NOT step in the drawers. You may fall which may cause personal injury.• Appropriately secure this product before moving it with a forklift.• DO NOT tow with power equipment. The product could tip, which may causepersonal injury or product damage.• DO NOT alter this product in any manner. For example, do not weld externallockbars or attach electrical equipment. This may cause product damage orpersonal injury.• Keep the product on level surfaces. The product may become unstable and tip ifstored or moved on an un-level surface, which may cause personal injury orproduct damage.• Lock the drawers and doors before moving this product. The drawers or doorscould come open and make the product unstable and tip, which may causepersonal injury or product damage.• When the cover is opened, be sure the cover stop is in the locked position. This willprevent accidental closure and personal injury.• BE CAREFUL when closing the cover. Remove hands before the cover closescompletely to prevent personal injury.• The maximum weight for each drawer should be no more than 50 pounds.• The maximum product weight, including contents, should be no more than 1000pounds for Roll-Aways.• Close the cover and lock the drawers and doors before moving this product. Thedrawers or doors could come open and make the product unstable and tip, whichmay cause personal injury or product damage.• Remove the work surface, if provided, from the cart before mounting the chest.Failure to do so may cause the chest to slide off, which may cause personal injuryor product damage.• When locking a chest, close the drawers before closing the cover for lock bars towork properly.F1492 2

/ 4

Related manuals for Craftsman 706.132880